If you need a new shingle roof in Gray, here's what matters: fiberglass mat construction with ceramic granulated coating for UV protection and fire rating. Architectural shingles carry a Class A fire rating and wind resistance ratings up to 130 mph. Gray Roofing & Maintenance helps you pick the right shingle for your home and budget.
Every shingle roof starts with the layers beneath the shingles. Synthetic underlayment rolls across the entire roof deck as the primary waterproof barrier. Ice-and-water shield goes down in the valleys, along the eaves, and around every penetration — chimney flashing, pipe boots, vent boots. Drip edge along every eave and rake directs water into the gutters instead of behind the fascia.
Our Shingle Roofing Process
Shingle Selection
Free on-site inspection. We measure, assess your roof deck condition, and walk you through architectural vs. three-tab shingles with realistic pricing. No pressure, just facts.
Old Roof Removal
Full tear-off to the deck. Old shingles, deteriorated felt, and corroded flashing removed and hauled to the dumpster. Deck inspection catches hidden damage — rotted sheathing, water-stained OSB, nail pops — before it's buried under new shingles.
Waterproofing Layer
Synthetic underlayment across the full roof deck. Ice-and-water shield in valleys, along eaves, and around chimney flashing, pipe boots, and vent boots. New drip edge installed at every eave and rake. Step flashing and counter-flashing at all wall transitions.
Shingle Courses
Field shingles installed with proper exposure and overlap. Nailed per manufacturer specs — 4 nails standard, 6 in high-wind zones. Starter strips at the eave prevent wind uplift. Ridge cap shingles finish every peak with integrated ridge vent for ventilation.
What Gray Customers Say
"From the first phone call to the final walkthrough, everything was seamless. The team was courteous and efficient. Already recommended them to two friends."
"After getting several quotes, these guys stood out with their honesty and knowledge. No pressure, just straightforward advice and excellent workmanship."
"Best experience we've ever had with a home service company. On time, on budget, and the results exceeded what we expected. Truly top-notch."
Why Choose Gray Roofing & Maintenance for Shingle Roofing?
Nailed to Manufacturer Spec
Every shingle nailed in the designated nailing zone with the correct number of fasteners. This is what keeps the manufacturer warranty valid and the shingles on your roof in high wind.
Proper Flashing at Every Penetration
Chimney flashing, step flashing, pipe boots, vent boots, valley channels — every transition sealed with waterproof sealant and proper overlap. Flashing failures cause 90% of roof leaks.
Full Tear-Off Standard
We strip to the deck on every shingle job. No overlay shortcuts. Your underlayment, ice-and-water shield, and flashing are installed on a clean, inspected roof deck.
Ice-and-Water Shield Standard
Every shingle roof includes ice-and-water shield at valleys, eaves, and around penetrations. This self-adhering membrane is the last line of defense against water intrusion if a shingle fails.